Over 10,000 items in our stock ready for same day dispatch!
Or 'Click & Collect' from our Twickenham Superstore
×
Pinch to Zoom Image
Trend H/JIG/A Hinge Jig Two Part With Case
Click & Collect in Store
In Our Stock
Ready For Despatch
ONLY £219.95 INC
£183.29 EXC
Order within 11h 29m for next working day delivery on Wednesday 29th January
LOGIN TO ADD FAVOURITES
£1.75 LOYALTY POINTS
Trend H/JIG/A Hinge Jig Two Part With Case
In Our Stock
Ready For Despatch
ONLY £219.95 INC
£183.29 EXC
Order within 11h 29m for next working day delivery on Wednesday 29th January
Trend H/JIG/A Hinge Jig Two Part With Case
The two part Contractor Hinge Jig is a portable template set designed for recessing hinges in wooden doors & frames using a plunge router.
It is easy to use with minimal setting-up time, completing the job both accurately & quickly.
Used on-site & in joinery shops to increase productivity with excellent results.
Four apertures for fire door requirements.
No need for marking out in the conventional way.
Quick & simple to set-up as the hinge is used as the pattern.
Clean & accurate recesses are achieved every time. Suitable for timber based doors & square butt hinges.
Can be used on both inside and outside doors, rebated frames and on maximum 25mm thick fixed stops.
Use with a light duty plunge router with 1/4 inch collet.
Long reach router cutter required, 12mm diameter with 70mm overall length.
Angled position slots to prevent creep.
Unibase may be needed.
T4EK router requires a ref. UNIBASE or special guide bush ref. GB/T4/160.
Dimensions:
Hinge sizes possible
Length min.=2 5/8" (67 mm)
Length max.=5" (127 mm)
Width min.=3/8" (9.5 mm)
Width max.=1 3/8" (35 mm)
Width max. in 35mm rebate=20 mm
Width max. in 44mm rebate=30 mm
Door sizes possible
Height min.=6' 5" (1955 mm)
Height max.=2100 mm*
Thickness min.=5/8" (16 mm)
Weight=3.3 kg
Jig overall length=1957 mm
Plate thickness=2 mm
Fixed stop max. thickness=25 mm
* Please note for doors over 2040mm the bottom hinge will be higher than 9" up.
Supplied with
- 1 x Aluminium Template
- 2 x Bradawls
- 1 x Special Guide Bush
- 1 x Hex Key
- 1 x 4mm Spacing Gauge
- 1 x Plastic Storage Tube (with HINGE/JIG)
or
1 x Fabric storage case (with H/JIG/A)