This item is delivered direct from the manufacturer so is subject to being in stock with them. Should the item not be in stock with the manufacturer, you will be contacted either by telephone or email at the earliest opportunity (during trading hours 8.30am-5.30pm Mon-Sat).
It will not be available for same day collection if you place a Click & Collect. You will be notified by phone or email when item is ready to collect.
Designed for high volume operation, coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them in the pallet and crate, fencing, garden furniture and the construction industries.
All Coil Nails are Round Head nails.
Typically:
Coils of nails with diameters from 2.0mm to 2.2 mm contain 350 nails.
Coils of nails with diameters from 2.5mm to 3.1 mm. Contain 225 nails.
Roofing nail coils contain 120 nails, due to the extra large diameter of the head.
15° Collation angle
Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them.
Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater.
Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish.
Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.
For use with
N57C-1CE heavy-duty Coil Nailer
N58C-1-E Coil Nailer
N58C-1-E Coil Nailer
N66C-2-E Coil Nailer
2.1mm Ring Coil Nails
Nail Finish. Galvanised
Nail Length. 50mm
Qty. Box of 17,500